How to apply?

Step 1: Clean the skin of your breast to remove any lotion or perfume.

Step 2: Remove the cup from the storage board and see how it magically regains its molded shape.

Step 3: Place the nipple covers on the adhesive area wherever yu prefer.

Step 4: Stick both cups to the breasts, by placing one side at a time.

Step 5: Fasten the front closure.

Step 6: Make sure the position of the cups are at the same height on both breasts. Press the cups firmly onto your skin.

Step 7: After use, finse with water, air dry (Do not twist) and store the bra on the storage board.

 

How to Remove?

1. Start by carefully loosening the edges of the adhesive bra, especially around the cups. Don’t rush the process, as it can be uncomfortable or cause irritation if removed too quickly.
2.  If the bra is particularly sticky, you can try using a little warm water around the edges to help loosen the adhesive.
3.  Carefully peel the bra away from your skin. Use your other hand to hold your skin in place to prevent any pulling or tugging.
4. Once removed, wash the skin with warm water and mild soap to remove any remaining adhesive residue. You can also use a gentle exfoliator or oil to ensure all residue is removed.
5. After removal, your skin might feel a little dry or sensitive. Apply a light moisturizer to soothe and hydrate your skin.
   

 

Care instructions

Clean with lukewarm water. Do not twist. Let the bra air dry, then place the protection foil back on the bra before putting it away.