How to apply?
STEP 1. Clean the skin area that is going to be covered by the bra, ensure no traces of lotion or perfume remain.
STEP 2. Remove foil from the inside of the cup. Make sure to keep the protection foil, as you will reuse this later.
STEP 3. Stick both cups to the breasts, by placing one side at a time.STEP 4. Fasten the front closure; this will create a nice cleavage.
STEP 5. Make sure the position of the cups are at the same height then press firmly onto your skin with both hands.Care instructions
Clean with lukewarm water. Do not twist. Let the bra air dry, then place the protection foil back on the bra before putting it away.
Pro Tip: In case you lose the protection foil, please do not use stretch foil, but instead use baking paper for better protection!
Caution: We recommend that you perform a skin test 24 hours before extended use by wearing the product with silicone and adhesive for up to 4 hours. Do not use on open cuts, skin disorders, rashes, sun damages or sunburned skin, white patches or skin depigmentation problems. Even if you have had no previous reaction to this or similar products, sensitivity may occur. Do not wear overnight, it is recommended that you do not wear the Product for more than 6-8 hours at a time. Women with a significant amount of melanin or family history of depigmentation may experience skin lightening from the silicone and adhesive. Not recommended for women with sensitive skin.
Women with sensitive skin or open cuts should avoid using this product.
Women with sensitive skin or open cuts should avoid using this product.